Mould is one of the most common complaints in Montreal apartments, especially in winter. Cold exterior walls, old windows, poorly ventilated bathrooms, basements below ground level and a city full of century-old buildings create the perfect conditions for condensation and humidity. A few spots on a window sill may be easy to clean. A wall that turns black every winter, a musty smell in every closet or water infiltration after each storm is another matter.
This guide explains how to identify the source of the problem, what you can do yourself, what your landlord is responsible for under Quebec law, and the steps to take if nothing changes.
Why mould appears in Montreal apartments
Mould needs three things: moisture, a surface to grow on, and time. In Montreal, moisture usually comes from one of four sources.
| Source | Typical signs | Who is usually responsible |
|---|---|---|
| Condensation on cold surfaces | Water droplets on windows in winter, black spots in corners of exterior walls, behind furniture | Shared: ventilation and heating habits, but also insulation and windows |
| Water infiltration | Stains on ceilings or walls after rain or snowmelt, bubbling paint | Landlord: roof, facade, foundations, windows |
| Plumbing leaks | Damp floor under the sink, soft drywall behind the shower, stains below a bathroom | Landlord, unless caused by the tenant’s misuse |
| Ground moisture | Musty smell and damp walls in basement or garden-level units | Landlord: foundations, drainage, waterproofing |
Understanding the source matters, because it determines both the solution and the responsibility.
Health effects: why it matters
Health authorities recognize that living with mould and excessive humidity is associated with respiratory symptoms, allergies and asthma, especially in children, older adults and people with existing respiratory conditions. The goal is not to panic over a small spot of mildew on a window seal, but not to ignore a persistent problem either. If you or your children have symptoms that worsen at home, mention it to your doctor and keep notes.
What tenants can do to prevent condensation
Many mould problems in winter come from humid indoor air meeting cold surfaces. Some habits make a big difference:
- Run the bathroom fan during showers and for 15 to 20 minutes afterwards. If there is no fan or it does not work, ask your landlord to install or repair it.
- Use the range hood when cooking, especially when boiling water.
- Keep a minimum temperature in every room. Closing the heat completely in a bedroom makes walls colder and condensation more likely. Our winter heating guide explains how to balance comfort and bills.
- Leave space behind furniture placed against exterior walls so air can circulate.
- Avoid drying laundry indoors without ventilation, or use a dehumidifier when you do.
- Measure humidity with an inexpensive hygrometer. In winter, indoor humidity that stays high often leads to condensation on windows.
- Wipe condensation from windows and sills in the morning.
- Clean small surface spots early with an appropriate household product, wearing gloves, before they spread.
What your landlord must do
Under the Civil Code of Québec, the landlord must deliver the dwelling in good habitable condition, maintain it in that condition throughout the lease, and make all necessary repairs other than minor maintenance repairs. Water infiltration, defective windows, broken ventilation, plumbing leaks and foundation problems fall under the landlord’s responsibility.
Concretely, when mould is caused by the building, the landlord should:
- Find and fix the source (roof, flashing, window seals, plumbing, drainage, insulation).
- Clean or remove contaminated materials properly, which for large areas usually means hiring a specialized contractor.
- Repair damaged walls, ceilings or floors.
- Install or repair ventilation where needed.
Landlords and tenants who need quotes from qualified contractors for decontamination or waterproofing can compare offers on estimations.pro.
Step by step: how to handle a mould problem
1. Document
Take dated photos and videos of the affected areas, measure their size, and note when they appeared and how they evolve. Keep hygrometer readings if you have them. Write down any water infiltration events.
2. Notify the landlord in writing
Send a message or letter describing the problem, its location and when it started, and ask for repairs within a reasonable time. Keep proof of sending. You are legally required to inform the landlord of serious defects so they can act.
3. Allow access for inspection and work
The landlord must give 24 hours’ notice for inspection and work, except in emergencies. See our article on landlord entry rules.
4. Follow up
If nothing happens, send a formal notice (mise en demeure) giving a final deadline.
5. Ask for a city inspection
The City of Montreal has a by-law on the sanitation and maintenance of dwellings and can send an inspector, notably for mould, infiltration and humidity issues. You can make a request through 311. An inspector’s report can support your case.
6. Apply to the TAL
The Tribunal administratif du logement can order the landlord to carry out repairs, reduce the rent, award damages and, in serious cases, authorize the tenant to terminate the lease. Our TAL claim guide explains how to file. Our broader article on repairs and tenant rights covers what you can and cannot do yourself.
What not to do
- Do not stop paying rent on your own. Withholding rent without a TAL decision can lead to an application for non-payment against you.
- Do not cover mould with paint. It hides the problem and may destroy evidence.
- Do not do major demolition yourself. Removing contaminated drywall without protection can spread spores.
- Do not ignore the problem until you move out. If you never informed the landlord, they may argue that the damage worsened because of your silence.
When the dwelling becomes unfit to live in
In serious cases, a dwelling can be considered unfit for habitation, for example when there is a serious threat to the health or safety of the occupants. Quebec law allows a tenant to abandon a dwelling that is unfit for habitation, provided they inform the landlord of the condition of the dwelling before leaving or within ten days after leaving. This is a serious step with consequences: get advice from the TAL or a housing committee first, and keep strong evidence such as an inspector’s report.
Before you sign: how to spot humidity problems during a visit
- Smell closets, the bathroom and the basement. A musty odour is a warning sign.
- Look at windows: black seals, rotten wood, water marks on sills.
- Check ceilings under the bathroom and near exterior walls for stains.
- Look behind furniture and in corners, especially on north-facing walls.
- Ask direct questions: Has there been water infiltration? Has the roof or the foundation been repaired recently? Is there a working bathroom fan?
- Fresh paint in one spot can hide a problem. Ask why it was repainted.
Add these points to our general checklist before signing a lease, and see our guide to what to check when renting in winter.
Responsibility in practice: examples
| Situation | Likely responsibility |
|---|---|
| Water stain spreading on the ceiling after every heavy rain | Landlord: roof or infiltration repair |
| Black spots behind a couch pressed against a cold wall, no ventilation used | Shared: tenant habits, but insulation may also be deficient |
| Bathroom ceiling mould, no exhaust fan in the bathroom | Landlord should provide adequate ventilation |
| Basement apartment with damp walls year-round | Landlord: drainage and waterproofing |
| Leak under the sink caused by a tenant’s damaged hose | Tenant may be responsible for resulting damage |
Insurance
Tenant insurance generally covers your belongings and your civil liability, but policies vary on water damage and mould, and gradual leaks are often excluded. Read your policy and our article on tenant insurance in Montreal.
Frequently asked questions
Can my landlord blame me for all the mould?
Not automatically. If the cause is infiltration, a leak or a building defect, the landlord is responsible for repairs. If condensation is the main cause, both the building and living habits may be involved. Documentation helps sort this out.
Can I get a rent reduction?
The TAL can order a rent reduction when you lose part of the enjoyment of your dwelling because of a defect that the landlord does not repair.
Who do I call for an inspection in Montreal?
Contact 311 to request an inspection under the city’s sanitation and maintenance by-law.
Can I break my lease because of mould?
Only in serious cases, generally with a TAL decision or if the dwelling is unfit for habitation, following the legal steps. Get advice before leaving. Our guide on how to break a lease in Quebec lists the options.
Sample letter to your landlord
Subject: Mould and humidity in unit 2, request for repairs
Hello,
Since December, black mould has been appearing on the bedroom wall facing the street and around the bathroom window, despite regular cleaning and ventilation. After the rain on January 12, a new water stain also appeared on the bedroom ceiling. I attach dated photos.
I believe there may be water infiltration or an insulation problem. I ask you to inspect the apartment and carry out the necessary repairs within a reasonable time. I am available to give access with 24 hours’ notice. Please let me know within ten days when the inspection will take place.
Thank you,
Seasonal prevention calendar
| Season | What to watch |
|---|---|
| Fall | Check window seals and bathroom fan before the cold arrives |
| Winter | Condensation on windows, corners of exterior walls, closets on exterior walls |
| Spring | Snowmelt infiltration in basements and around windows |
| Summer | Humidity in basements and garden-level units; use a dehumidifier |
Official resources
The Tribunal administratif du logement explains landlords’ and tenants’ obligations regarding the condition of the dwelling. For health information, start with the Government of Quebec portal or call Info-Santé 811.
